Author Correction: Structural analysis of customized 3D printed plate for pelvic bone by comparison with conventional plate based on bending process (Scientific Reports, (2023), 13, 1, (10542), 10.1038/s41598-023-37433-1)

Woo Lam Jo; Yang Guk Chung; Seung Han Shin; Jae hak Lim; Moo Sub Kim; Do Kun Yoon

doi:10.1038/s41598-023-49800-z

Author Correction: Structural analysis of customized 3D printed plate for pelvic bone by comparison with conventional plate based on bending process (Scientific Reports, (2023), 13, 1, (10542), 10.1038/s41598-023-37433-1)

Woo Lam Jo
, Yang Guk Chung
, Seung Han Shin
, Jae hak Lim
, Moo Sub Kim
, Do Kun Yoon

Department of Orthopedics

Catholic Univ. of Korea Coll. Med.
KAVILAB Co. Ltd.

Research output: Contribution to journal › Comment/debate

Abstract

The original version of this Article contained an error in Affiliation 1, which was incorrectly given as ‘Department of Orthopaedic Surgery, The Catholic University of Seoul St. Mary’s Hospital, 222, Banpo-Daero, Seocho-Gu, Seoul, Republic of Korea’. The correct affiliation is listed below: Department of Orthopaedic Surgery, Seoul St. Mary’s Hospital, College of Medicine, The Catholic University of Korea, Seoul, 222, Banpo-Daero, Seocho-Gu, Korea The original Article has been corrected.

Original language	English
Article number	22352
Journal	Scientific Reports
Volume	13
Issue number	1
DOIs	https://doi.org/10.1038/s41598-023-49800-z
State	Published - Dec 2023

Bibliographical note

Publisher Copyright:
© 2023, The Author(s).

Access to Document

10.1038/s41598-023-49800-z

Fingerprint

Dive into the research topics of 'Author Correction: Structural analysis of customized 3D printed plate for pelvic bone by comparison with conventional plate based on bending process (Scientific Reports, (2023), 13, 1, (10542), 10.1038/s41598-023-37433-1)'. Together they form a unique fingerprint.

Cite this

Jo, W. L., Chung, Y. G., Shin, S. H., Lim, J. H., Kim, M. S., & Yoon, D. K. (2023). Author Correction: Structural analysis of customized 3D printed plate for pelvic bone by comparison with conventional plate based on bending process (Scientific Reports, (2023), 13, 1, (10542), 10.1038/s41598-023-37433-1). Scientific Reports, 13(1), Article 22352. https://doi.org/10.1038/s41598-023-49800-z

@article{a2de89a3581a4d34a7b45fd05f722970,

title = "Author Correction: Structural analysis of customized 3D printed plate for pelvic bone by comparison with conventional plate based on bending process (Scientific Reports, (2023), 13, 1, (10542), 10.1038/s41598-023-37433-1)",

abstract = "The original version of this Article contained an error in Affiliation 1, which was incorrectly given as {\textquoteleft}Department of Orthopaedic Surgery, The Catholic University of Seoul St. Mary{\textquoteright}s Hospital, 222, Banpo-Daero, Seocho-Gu, Seoul, Republic of Korea{\textquoteright}. The correct affiliation is listed below: Department of Orthopaedic Surgery, Seoul St. Mary{\textquoteright}s Hospital, College of Medicine, The Catholic University of Korea, Seoul, 222, Banpo-Daero, Seocho-Gu, Korea The original Article has been corrected.",

author = "Jo, \{Woo Lam\} and Chung, \{Yang Guk\} and Shin, \{Seung Han\} and Lim, \{Jae hak\} and Kim, \{Moo Sub\} and Yoon, \{Do Kun\}",

note = "Publisher Copyright: {\textcopyright} 2023, The Author(s).",

year = "2023",

month = dec,

doi = "10.1038/s41598-023-49800-z",

language = "English",

volume = "13",

journal = "Scientific Reports",

issn = "2045-2322",

publisher = "Nature Research",

number = "1",

}

Jo, WL, Chung, YG, Shin, SH, Lim, JH, Kim, MS & Yoon, DK 2023, 'Author Correction: Structural analysis of customized 3D printed plate for pelvic bone by comparison with conventional plate based on bending process (Scientific Reports, (2023), 13, 1, (10542), 10.1038/s41598-023-37433-1)', Scientific Reports, vol. 13, no. 1, 22352. https://doi.org/10.1038/s41598-023-49800-z

Author Correction: Structural analysis of customized 3D printed plate for pelvic bone by comparison with conventional plate based on bending process (Scientific Reports, (2023), 13, 1, (10542), 10.1038/s41598-023-37433-1). / Jo, Woo Lam; Chung, Yang Guk; Shin, Seung Han et al.
In: Scientific Reports, Vol. 13, No. 1, 22352, 12.2023.

Research output: Contribution to journal › Comment/debate

TY - JOUR

T1 - Author Correction

T2 - Structural analysis of customized 3D printed plate for pelvic bone by comparison with conventional plate based on bending process (Scientific Reports, (2023), 13, 1, (10542), 10.1038/s41598-023-37433-1)

AU - Jo, Woo Lam

AU - Chung, Yang Guk

AU - Shin, Seung Han

AU - Lim, Jae hak

AU - Kim, Moo Sub

AU - Yoon, Do Kun

PY - 2023/12

Y1 - 2023/12

N2 - The original version of this Article contained an error in Affiliation 1, which was incorrectly given as ‘Department of Orthopaedic Surgery, The Catholic University of Seoul St. Mary’s Hospital, 222, Banpo-Daero, Seocho-Gu, Seoul, Republic of Korea’. The correct affiliation is listed below: Department of Orthopaedic Surgery, Seoul St. Mary’s Hospital, College of Medicine, The Catholic University of Korea, Seoul, 222, Banpo-Daero, Seocho-Gu, Korea The original Article has been corrected.

AB - The original version of this Article contained an error in Affiliation 1, which was incorrectly given as ‘Department of Orthopaedic Surgery, The Catholic University of Seoul St. Mary’s Hospital, 222, Banpo-Daero, Seocho-Gu, Seoul, Republic of Korea’. The correct affiliation is listed below: Department of Orthopaedic Surgery, Seoul St. Mary’s Hospital, College of Medicine, The Catholic University of Korea, Seoul, 222, Banpo-Daero, Seocho-Gu, Korea The original Article has been corrected.

UR - https://www.scopus.com/pages/publications/85179743344

U2 - 10.1038/s41598-023-49800-z

DO - 10.1038/s41598-023-49800-z

M3 - Comment/debate

C2 - 38102177

AN - SCOPUS:85179743344

SN - 2045-2322

VL - 13

JO - Scientific Reports

JF - Scientific Reports

IS - 1

M1 - 22352

ER -

Author Correction: Structural analysis of customized 3D printed plate for pelvic bone by comparison with conventional plate based on bending process (Scientific Reports, (2023), 13, 1, (10542), 10.1038/s41598-023-37433-1)

Abstract

Bibliographical note

Access to Document

Other files and links

Fingerprint

Cite this